ATONE
A Channel Strip with A-Type EQ, Filters and 436 style Compressor
It has lots of capabilities for tone shaping with its own custom design and internal routing.
There is no line or mic preamp as an input module but INPUT knob will drive EQ circuit’s Gain Trim to get nasty op-amp saturation.
Compressor section based on 436c with extra modifications. Compressor has AMOUNT knob to compression and make-up gain. So, it will be gain compensated.
FEATURES
– INPUT: It will control EQ circuit’s Gain Trim to overload op-amp and get saturation
– HPF & LPF: A-Type filters. HPF 20Hz to 600Hz. LPF 20kHz to 500Hz
– EQUALIZER: A-Type 3 band inductor based eq
– COMPRESSOR: 436c style compressor with modified attack and release times. Also, AMOUNT knob will adjust compression amount and make-up gain at the same time.
– OUTPUT: Clean master volume control
– SYSTEM: This will bypass whole plug-in. Also, each modules have their own bypass buttons. EQ section’s bypass won’t bypass INPUT knob. Only bands will be bypassed independently. So, you can still use saturation.
Resizable interface. Simple “Bottom Right Corner Handle” to resize. 50% to 200%.
*Resizing Tip: When you duplicate plug-in, it will remember current state of GUI size. But if you load new instance, it will be opened at default size. To get rid of this issue, simply follow these steps;
1. Open plug-in for the first time
2. Resize GUI according to your screen resolution or you liking before setting any knobs
3. Save this state as default preset with your DAW
Now, you will be able to load new instances with same size.
(If you want to go default size, simply double click to resize handle.)
Version 1.0 – 16.4.2024
Available Formats
VST3 / AU / AAX Native – Audiosuite | Mac 10.11 or Higher | Intel / Apple Silicon
VST3 / AAX Native – Audiosuite | Windows 10 – 11
Mac Versions require a graphic card that supports “Metal”
Windows Versions require a graphic card that supports “OpenGL”